Another great new release from Aspire that we suggesting you grab for your favorite Salt Nics rather than using pods as it is a direct mouth to lung. We tried this tank out for a week and loved the flavour it produced on our salt nics and regular juice. It is perfect if you have an older device like a KangerTech but need a new tank. This tank is great for under 50W older devices that still work!
A 3.5ml capacity atomizer with a pull top, slide to open filling system. This tank is 23mm at its base, 24.5mm at its widest point, and is 47mm tall.The replacement coils have a thread less push fit style that complements that Tigon's spring-loaded e-liquid chamber seal. This allows the user to remove the coil head while keeping e-liquid within the reservoir.
Switching to the 1.2-ohm coil is where the Aspire Tigon starts to shine which really isn’t a surprise considering Aspire’s lengthy history of producing excellent mouth to lung kits throughout the years. Slapping the MTL coil into the tank yielded a significant increase in flavor with only minimal impact on overall vapor produced.
Another positive feature we noticed when vaping with either of the included coils is that the airflow was quite smooth and inhaling didn’t produce any turbulence or whistling noises. Airflow goes through a single 8mm by 1.5mm internal air slot or five 1mm MTL air slots. Vapers can adjust the airflow with the bottom adjustment ring with a single 8mm by 1.5mm air slot.
Depending on the coil that you use, you’re also going to want to vary the nicotine levels of your e-liquid. As the DTL coil allows the Aspire Tigon to fire up to a considerably higher output, its recommended to use an e-liquid with a nicotine level in the single digits range. Inversely, using the MTL coil works best when paired with an e-liquid with a bit more kick to its step meaning nicotine salts are a good choice to use in this scenario.
Ease of Use
Aspire Tigon uses an easy to fill sliding top cap which lets you refill the tank without having the remove the tank. The tank is appropriately sized with a 3.5ml max capacity for holding e-liquids.
When vaping with the MTL coil, a single fill of the tank is most likely going to get you through an entire day while using the DTL coil will probably require a refill or two depending on how you vape.
When it comes to actual use, the Aspire Tigon is pretty straightforward in its operation; a single power/firing button fires up the device with a quick 5 presses. Hold the button and inhale to vape. Another 5 presses turn it off.
Setting up the device is pretty hassle-free as well as the coils simply slide into the chamber, although fresh coils will need to be primed by waiting for 5-10 minutes after filling the tank before you can take a puff.
- One Tigon Sub-Ohm Tank
- Two 510 Delrin Drip Tips
- One 0.4ohm DL Tigon Coil
- One 1.2ohm MTL Tigon Coil
- One Spare Parts Pack