The Freemax Mesh Pro 2 904L  coils are designed for the new Maxus tank or the any of the Fireluke Mesh Tanks/Fireluke 2 or 3 versions. The air intake ports alone are massive and the dual mesh coils are extremely visible making them very easy to prime, it’s also clear they’ve been designed with the cloud chucker in mind.  The amount created is stupendously good. Play around with the airflow as Freemax gave you a 4 types 904Ll coils to match your favorite wattage depending upon the juice complexity. If you’re going to use them on the lower recommended settings it’s probably best to restrict the airflow in order to get any balance to the flavours.

Made of military grade SS mesh wire and tea cotton formula material, these mesh coils will bring you an amazing vaping

experience that you have come to expect from Freemax.

Freemax M Pro 2 – How To Change The Coil

• Unscrew the deck clockwise (the glass section will remain attached to the top cap)
• Thread the coil into the deck clockwise until finger tight
• Screw the deck counter clockwise back onto the tank. Do not over tighten
• With the coil now installed, push back against the red indicator on the top cap to expose the fill port
• Gently administer E liquid into the fill port taking care not to overfill
• Slide the top cap back until it snaps into place

There’s an air release port incorporated which makes a world of difference especially when taking into account how much real estate the coil takes up with a TPD compliant tank fitted!

Mesh Pro Coil System

• M1 0.15Ω 
  • Rated for 40-70W
    • 65W Recommended
• M2 0.2Ω 
  • Rated for 60-90W
    • 80W Recommended
• M3 0.15Ω 
  • Rated for 80-110W
    • 100W Recommended
• M4 0.15Ω 
  • Rated for 70-110W
    • 95 W Recommended 

Make sure to properly prime each coils and pods before use.

Shipping Policy